April 20, 2018
Thank you for the good product.
It is the best compound.
September 25, 2015
Chalky and dusty
The product works in that it will cut and remove light scratches; however, it dries out very quickly and gums up the microfiber pad fast. I've attempted use with a FLEX DA and a rotary. With the rotary, the product heats up within seconds, dries out on the surface and then smears. My application technique was to prime a pad with product, apply @ 600-800 RPM before bumping up to 1200-1400 RPM (I resisted the urge kick it into warp drive, hyper speed and then attempted to back the speed back down.
ProsCuts paint as advertised provided that you can work fast and that your surface is prepped properly.
ConsDusty as F***!! and it gets everywhere (the dust). Dries out quickly and makes more of a mess than anything. More trouble than tit's worth in my opinion.
June 12, 2015
Great fast cutting compound - but......
Just used this on a 44 foot car trailer. The product can be wiped off fairly easily when wet but can not be wiped off when dry.
ProsIf the paint can be buffed out then this product will do it. It cuts fast and finishes well but you have to work in small areas (14" x 14").
ConsCan only be worked in small areas as you CAN NOT let this product dry up on you. I almost gave up on this stuff but I am glad that I did not, it will work wonders for paint - to the point of almost being magical.
December 14, 2014
Great for getting swirls out and quick shine
June 5, 2014
Best all around compound
Once you learn 105's cut time it will be your go to compound. It finishes the best over amy other compound. I use it in my detail shop.
By Donny Schlegel
May 18, 2011
105 compare to 3m #1
I Have found that the 105 out performs the 3m #1 ...
Page 1 of 1